坦克推进系统分段寿命试验统计分析

本文用生存分析方法,对坦克分段寿命试验进行了统计分析,并从理论上说明了坦克分段寿命试验的合理性.     

波速测量层合复合材料冲击损伤实验

在层合复合材料横向冲击试验中,用应变片记录层合板表层在冲击过程中的应变响应,根据波的传播理论和连续损伤力学,从波速变化间接测得冲击下材料的损伤及损伤率。通过实验测得玻璃纤维／环氧（ＧＥ）正交层合板的动态损伤阈值,并证实了ＧＥ复合材料在拉伸阶段比在压缩阶段有更快的损伤扩展速率     

不确定系统鲁棒控制方法及在火控系统中的应用

将Ｃｈｅｎ和Ｌｅｅ给出的线性不确定性系统设计的鲁棒方法推广到一类相当广泛的仿射非线性系统。并针对某双３５火炮的随动系统设计问题进行了仿真研究,仿真结果证明了方法的有效性。     

球头弹低速斜侵彻下薄板穿甲破坏机理研究

为探讨球头弹低速斜侵彻下靶板的破坏机理,通过系列弹道试验,对比分析了不同初始速度下弹体的变形,靶板的破坏模式,以及靶板的破口大小及形状；同时采用ANSYS/LS-DYNA对弹靶作用过程进行了数值模拟。结果表明：低速斜侵彻下靶板响应非完全对称,根据受力特征可将靶板划分为四个不同区域,即接触区,弯曲区,拉伸区和对称区；薄板的穿甲破坏可分为四个不同的阶段,即隆起变形,碟形变形,弯曲变形,弹体贯穿阶段；不同初始速度下靶板出现四种典型的穿甲破坏模式,随着初始速度的增加依次为隆起—碟形变形,隆起—碟形变形—拉弯撕裂破坏,隆起—碟形变形—拉弯剪切破坏,隆起—拉弯剪切破坏。斜侵彻下靶板破口形状为椭圆形,随着初始速度的增加,破口长径不断减小,形状由椭圆形向卵形过渡。     

球头弹低速斜侵彻下靶板穿甲破坏机理

为探讨球头弹低速斜侵彻下靶板的破坏机理,通过系列弹道试验,对比分析不同初始速度下弹体的变形、靶板的破坏模式以及靶板的破口大小和形状;同时采用ANSYS/LS-DYNA对弹靶作用过程进行数值模拟。结果表明:低速斜侵彻下靶板响应非完全对称,根据受力特征可将靶板划分为四个不同区域,即接触区、弯曲区、拉伸区、对称区;薄板的穿甲破坏可分为四个不同的阶段,即隆起变形、碟形变形、弯曲变形、弹体贯穿阶段;不同初始速度下靶板出现四种典型的穿甲破坏模式,随着初始速度的增加依次为隆起—碟形变形、隆起—碟形变形—拉弯撕裂破坏、隆起—碟形变形—拉弯剪切破坏、隆起—拉弯剪切破坏。斜侵彻下靶板破口形状为椭圆形,随着初始速度的增加,破口长径不断减小,形状由椭圆形向卵形过渡。     

一种消除直线永磁无刷直流电机边端效应对换相时机影响的方法

电磁弹射用直线永磁无刷直流电机的永磁体动子具有开断结构,使动子边端的磁场分布发生变形。当采用霍尔元件检测磁场实现换相时,这种边端效应就会影响换相时机。分析了这类电机的换相机理和动子开断结构对换相时机的影响,指出这类边端效应受极弧系数影响显著,并提出了利用不对称滞环比较器或简易单限比较器对霍尔输出信号进行处理从而消除这类边端效应影响的方法,实验验证了简易单限比较器方案的可行性。     

When are observed failures more informative than observed survivals?

A framework involving independent competing risks permits observing failures due to a specific cause and failures due to a competing cause, which constitute survival times from the cause of primary interest. Is observing more failures more informative than observing survivals? Intuitively, due to the definitiveness of failures, the answer seems to be the former. However, it has been shown before that this intuition holds when estimating the mean but not the failure rate of the exponential model with a gamma prior distribution for the failure rate. In this article, we address this question at a more general level. We show that for a certain class of distributions failures can be more informative than survivals for prediction of life length and vice versa for some others. We also show that for a large class of lifetime models, failure is less informative than survival for estimating the proportional hazards parameter with gamma, Jeffreys, and uniform priors. We further show that, for this class of lifetime models, on average, failure is more informative than survival for parameter estimation and for prediction. These results imply that the inferential purpose and properties of the lifetime distribution are germane for conducting life tests. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

内腐蚀缺陷尺寸对DN150承插管线承压能力的影响

为了科学地指导DN150承插管线的使用与管理,采用非线性有限元法对带内腐蚀缺陷的DN150承插管线进行了剩余强度的评估。通过分析和计算,研究了腐蚀缺陷宽度、长度和深度对管线极限承载能力的影响。结果表明：腐蚀缺陷宽度对DN150承插管线的承载能力影响很小,可忽略不计;随着腐蚀缺陷长度的增加,管线的承载能力略微减小,当缺陷长度达到150mm,管道失效压力基本不变;随着腐蚀缺陷深度的增加,管道失效压力呈线性递减,其对管道失效压力的影响程度远远大于腐蚀缺陷长度。     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

One-bit splitting deceptive jamming against SAR

One-bit quantization is a promising technique due to its performance retention and complexity reduction in a deceptive jammer against synthetic aperture radar (SAR). In this paper, the 1-bit quantization technology is utilized to agilely generate split false targets in the SAR imagery once the radar signal is intercepted, which reduces the complexity of the jammer significantly with guaranteed focusing quality. A single-frequency threshold is used to decompose harmonics incurred by the 1-bit quantization, and its parameters are adjusted through different pulse repetition intervals to provide steerable modulations. In this way, the SAR signal is split into coupled false scatterers during the 1-bit interception. By further deploying amplitude, time-delay, and Doppler frequency modulations on the 1-bit intercepted signal, the split false targets are created. The proposed approach is compared with different deceptive jamming methods to show its validity in effectiveness and cost, and numerical experiments are also presented for verification.